How to Repair Organic Fertilizer Equipment

1, When the tires of organic fertilizer equipment are damaged or replaced, use bricks, stones, wooden blocks or separate jacks for support.

The correct way is to use a jack and a solid wood pier to pad the frame at the same time, and the front and rear wheels are glued with triangular wood or large stones to prevent the vehicle from moving back and forth and prevent the support from falling and injuring people. This maintenance needs to be done on solid ground to prevent injuries from dumping objects.

2, After disassembly and assembly, the tires are re-inflated without protection, causing the rims to pop out and injure people.

The correct way is to lock the tire, lock ring and retaining ring together with a chain lock before inflating. You can also inflate the retaining ring so that one side faces the ground or wall to prevent the rim from popping out and injuring someone.

3, When repairing the fuel tank, you must clean the residual oil inside the container in advance, otherwise it will cause an explosion during the welding process. Cleaning method is to use alkaline water or hot water with vinegar, repeatedly clean 2-3 times, control and dry before welding. Do not dry with high-pressure air to prevent the explosion caused by electrostatic sparks. When welding, first open all box covers. When cleaning organic fertilizer equipment, agricultural machinery and other large tanks, personnel entering the tank should wear long-sleeved clothing, protective belts and signal ropes; the tank should not work too long, outside the tank should be responsible for. Personnel out of the tank should wash their faces, hands, mouth, clothes first with alkaline water, then cleaned with water.

4, When debugging the machine, people close to the fan, drive belt, exhaust pipe and other dangerous parts, or tools and parts fall on the machine, injuring people and damaging the machine.

Try to stop the machine during the debugging process, and the fire must be turned off when debugging in the lower part of the machine. If fire commissioning is required, a person should be designated to watch the operating mechanism to prevent outside personnel from starting agricultural machinery such as organic fertilizer equipment; check tools and parts and send signals after commissioning and before starting.

This article introduces the precautions for repairing organic fertilizer equipment. It is inevitable that the machine will encounter problems during use, so it is important to master the maintenance matters of organic fertilizer production line. Meanwhile, maintenance should also be paid attention to when using organic fertilizer equipment.