Crawler compost turner

Crawler compost turner Introduction

The Crawler compost turner belongs to the ground stacking fermentation mode. and it is the most economical fertilizer mode currently for civil engineering and human resources. The materials need to be stacked in long strips, stirred and crushed at regular intervals by the stacker and the organic material is decomposed under aerobic conditions. It also has the function of crushing, which greatly saves time and labor, significantly improves the production efficiency and product quality of the organic fertilizer plant, and greatly reduces the cost. When the stacker works, it can effectively mix sludge, viscous chicken manure etc with strains and straw powder evenly, which create a better aerobic environment for the fermentation of materials. The fermentation rate of crawler type stack-flipping machine is not only much faster than deep groove fermentation, but also effectively prevents the generation of harmful and odorous gases in the fermentation process such as oxygen sulfide, amine gas, and etc, which meets environmental protection requirements.

The characteristics of Crawler compost turner:
1. The operation is easier, The hydraulic directional type is eliminated, The space, labor, and diesel are saved, the working time is shortened, The fermentation cycle is advanced.
2. This product uses soft start for the turning clutch (the domestic similar products all use iron to iron hard clutch, which will cause serious damage to chains, bearings and shafts).
3. The front hydraulic push plate is installed, and eliminating the labor to tidy up the piles.
4. Roller hydraulic lifting.

 

Main Technical Parameters

Model	SDLDF-2400	SDLDF-2600	SDLDF-3000	SDLDF-3000
Turnover width (mm)	2400	2600	3000	3000
Turnover height (mm)	600-1000	1100-1300	1300-1500	1600-1800
Stack line spacing (mm)	800-1000	800-1000	800-1000	800-1000
Max diameter of material particles (mm)	250	250	250	250
Power	75	116	136	143
Working knife diameter (mm)	400	500	500	800
Working speed (m/min)	6-10	6-10	6-10	6-10
Processing capacity (m3/h)	500-700	1000-1200	1300-1500	1500-1800