Organic Fertilizer Dryer Daily Need How to Maintain

Organic fertilizer dryer can dry manure with moisture content of up to 70%-80% to 13% safe storage moisture directly at one time, and the whole process is carried out in a closed system, thus reducing the pollution to the environment in the drying process. After the dewatered wet material is added to the dryer, the material is evenly dispersed in the dryer and fully contacted with the hot air under the flip of the uniformly distributed plunger in the drum, which accelerates the drying heat transfer and mass transfer. During the drying process, the material is discharged from the dryer to the star discharge valve in another section of the dryer under the action of the copying plate with inclination and the hot air mass.

Organic fertilizer dryer daily maintenance methods.

Organic fertilizer dryer in the processing of materials is important to the heat source department, the material moisture determines the main factors of the heat source, these factors determine the effect of material drying, so each time to check the heat source, the maintenance method is every few days to wipe the heat source and the appearance, open the back cover, the internal also wipe, wipe the bearings lubricant, so as to reduce friction, the equipment also reduces the damage.

In the organic fertilizer dryer for drying materials a should be to close the door of the feed, take the material must wait for the equipment to stop completely, this can avoid accidents, do not suddenly stop when the dryer is working, otherwise it will bring unimaginable damage to the equipment, if interrupted because of power failure, the need to cut off the power supply of the equipment, so in the choice of organic fertilizer dryer equipment, to Pay attention to the appearance of the organic fertilizer produced by it, need to be able to be consistent with the natural drying products so that the machine operation does not change the nature of the material.